Navigation Home / Tags / Pro

ranking Sort Sort   |   date Sort Sort   |   member Sort Sort
Syndication

« Previous 1 2 3 4 5 6 7 8 9  ...  28 29 Next »
0
Date Submitted Mon. Feb. 13th, 2017 7:07 AM
Revision 1
Syntax Master autlmycar
Tags Launch | Pro | V | x431
Comments 0 comments
I wrote the following instructions a few years ago for my book, How To Sell Your Car Fast.

Let's face it, no matter where you drive, chips and scratches happen. Rocks and road debris can hit the hood and areas behind the wheels creating unsightly marks that turn into rust. Your kid cruises by with his/her bike in the garage and wellĄ­ you know.

Whether you are fixing a scratch or chips, the task of purchasing touch up paint and other tools is the same.

If you are hesitant about sanding, skip those steps and just put the paint into the chip. You will end up with a little bump, but it will look much better than the chip. Better yet, use this chip repair kit.

Chip Repair Steps:

1. Get your #2 artist brush or round toothpicks, some 1500 or 2000 grit

sandpaper, rubbing alcohol or a mild solution of Simple Green and

small sanding block. We use wooden BBQ skewers instead of toothpicks

because they are easier to handle and because they are longer and

easier to dip inside the touch-up paint bottle.

A toothpick makes a good applier of touch-up paint, but we like a

wooden BBQ skewer for better control

2. Clean the area around the chip with the alcohol or Simple Green (rinse

if you used Simple Green).

3. Remove any rust in the chip with a pencil eraser

4. Clean the area again with the alcohol or Simple Green and rinse.

5. Shake the touch-up paint for a least a minute to be sure the paint is

mixed well.

6. Dip the tip of the toothpick into the paint. Don't get a big blob,

just a little paint will do.

7. Don't forget to check for a color match on an inconspicuous area of

the car like the inside of the hood or trunk

8. Touch the tip of the toothpick to the center of the chip. The paint

will run down and begin filling the chip. Let dry for an hour, then

blow dry with a hair dryer for a half minute or so.

9. Repeat the previous step until the chip is filled just above the

surface.

10. When the final application of paint is completely dry, sand the area

with the wet sanding block (dipped in a bucket of water) in one

direction only, no circles, until flat. Do not sand too much or you

will sand off the clear-coat! Sand a little, wipe off and check

several times. NOTE: Do not do this step unless you are experienced or

are willing to spend a few hours sanding, buffing and polishing until

the surface is restored to its normal shine.

11 launch x431 v. Run your finger over the chip. If you can feel a bump it still needs

work.

12. Use your scratch remover or cleaner/wax to bring back the shine (This

step may take several applications).

Casey Brander - Car enthusiast and entrepreneur hoping to educate and help people who enjoy keeping their cars in mint condition because of the investment and because it's the right thing to do! Click on my website to find out how to make your car look great launch x431 pro.
Related Links http://www.x431dbscar.com
0
Date Submitted Thu. Feb. 9th, 2017 6:21 AM
Revision 1
Syntax Master autlmycar
Tags Launch | Pro | V | x431
Comments 0 comments
Whatever product you are about to buy, it is good to make a comprehensive research about the available options in the category to ensure good results launch x431 v+. As the marketing industry is very active, nowadays, finding suitable products is much easier. However, do not fall for the glitter and attractiveness in the advertisements. When it is about purchasing tires for your car, you need to be extra careful. As the tires of a car have great influence in its handling and safety, you cannot compromise their quality and reliability.
In order to make your purchase worthwhile, you need to find good tire dealers first. As there are plenty of dealers in all regions it will not be a difficult task. All you need is to customize your search according to the particular specifications. There are many things to notice while making a search for these dealers. The following hints will help you reach the right dealer easily.
Ask previous customers
Most of the tire dealers do not depend on advertisements to enrich their marketing process. It is through the satisfied customers that these franchises promote their business. However, you need to get the reference of their previous customers to know whether they are satisfied with their services or not. These dealers are nowadays concerned about the customer opinions so they are providing great customer services to create better reputation. Well, you might need to refer multiple customers to get the right results. Choose a dealer who most of the customers are giving good reviews about.
Look for service quality
As the competition in the field is very high nowadays, many tire dealers are providing unique facilities and services to stay on top of the business. You can make the most of these situations by creating a good list of dealers with unmatched services. Even though small scale dealers cannot compete with the major stores, they too provide good extra services in minimal charges. Choose a dealer who provides good services throughout the life of the tires. Some of them even deliver free services for solving flat tires or free tire rotation to increase the life of the tires.
Ask your car dealer
Even though most of the car dealers do not sell tires, they can suggest the most suitable tire dealers. They are responsible for helping you find the best dealer in order to stay satisfied with your car. Most of the car dealers have good contacts with the tire dealers. This will help you get the exact size and style of tires that are used in your car. As getting the tires with the right specifications is important, you have to be very careful about this.
Online reviews
Another best way to find good tire dealers is using the online user reviews. As internet is very common nowadays, accessing these resources will not be a difficult task. There are also magazines and other similar resources that provide lists of reputed dealers in a specific location launch x431 v pro.
Keep all these factors in mind and enjoy shopping.

Related Links http://www.x431dbscar.com
0
Date Submitted Wed. Feb. 8th, 2017 2:40 AM
Revision 1
Syntax Master autosuma
Tags Autel | elite | MaxiSys | ms908p | Pro
Comments 0 comments
Finding a good oil change shop is like looking for a good doctor or dentist. To get the best results you have to do your research. Below, we will explore a few points to keep in mind.

Fast Service

When getting an oil change, you should never be stuck in the waiting area for hours. If so, then the company seriously overbooked or may not know what they're doing. Basically, such a service should take 20 to 30 minutes max. Often, people have the company check other fluids, switch out the air filter autel maxisys pro ms908p, windshield wiper blades and more, which could extend the waiting period. However, even with getting all this done, you should still be in and out in a reasonable amount of time.

Thoroughness

With so many oil-change companies working hard to provide prompt service, sometimes a few details can fall through the cracks. There's no point in having fast service if the job isn't done right. Before letting someone work on your car, be sure to find out if they have a checklist of things they look at or refer to in order to ensure your vehicle was worked on properly. Also, you want to make sure there isn't excess oil splattered outside the engine. Worse yet, you definitely don't want to have greasy fingerprints inside your car where the worker had to get in the driver's seat to pop the hood.

Skill

The whole point of going to a business for an oil change is so that you can leave your vehicle in capable hands. However, you would be surprised to find out there are some places that don't have skilled workers on staff. Unfortunately, this can mean bad news for your vehicle, so don't hesitate to ask about how long the employees have been doing the service. If you're met with vagueness or a bad attitude about it autel maxisys elite, this is a red flag that they're not on the up and up, so you should move on.

Good Reputation

Trusting your vehicle to just any company is never a good idea. You want the people that are working on your car to have a good reputation in the industry as well as your neighborhood. Be sure to ask around or read a few reviews about a company to get a feel for what others are saying about their oil change service. Just because a company carries a name you recognize doesn't necessarily mean they can meet your needs. Do your research ahead of time to ensure you get the services you expect.

Friendliness

It's one thing to have to get good work done on your vehicle. It's another when you get this service with a smile or friendly attitude. No one wants to take time to get an oil change, yet it's necessary if you want to keep your vehicle for a decent amount of time. So when you schedule an appointment somewhere or drop in, it's nice to chat with someone that treats you with kindness and respect you expect from a company that wants your business.


Related Links http://www.autelonline.com
0
Date Submitted Fri. Jan. 20th, 2017 2:36 AM
Revision 1
Syntax Master axcartool
Tags Autel | Launch | MaxiSys | ms908p | Pro | V | x431
Comments 0 comments
Owning a new car makes us all cautious when using it. We don't even want it to get a tiny scratch. When out on the road or highway driving our new car, we take caution in driving to protect our car from having any damage. We try hard not to bump into other vehicles and risk damage. We also park our new car carefully to avoid any accidental bumping to other cars parked. Yet accidents can happen no matter how much we avoid it. There are still reckless drivers around us who doesn't care much if they meet an accident or damage properties. These drivers are all negligent and they can cause potential damage to our vehicles such as a minor scratch or a huge dent. Dents are not good to see especially on a new vehicle. Good thing there are dentmaster repair around that helps in doing the job.

If our new vehicle unfortunately meet an accident and acquire damages such as dents autel maxisys pro ms908p, it can be very frustrating on our part. But we can take comfort on the fact that there are many available dentmaster repair near us that can do a good job in fixing the major damages of our new vehicle such as huge dents. Dent master repair centers are dedicated in working out the dent damages of our new vehicle so that it will be restored to its original state. The technicians in this repair centers are trained well to fix the dents in our vehicle making it look as if it was never dented at all. They also ensure that customer satisfaction on their job is achieved. We can find the best dentamaster repair centers covering areas in and around South Wales, Bridgend, Swansea, Cardiff and Newport launch x431 v+. They provide the best and quality service in repairing dents.

The dentmaster repair company has a professional technician that will quote the extent of the dent damage and provide thorough details on what can be done with it. For minor dents, they may recommend the Paintless Dent Repair (PDR). This car dent repair involves massaging the dent of the new vehicle carefully and making it look new again. The metal is usually stretched out and smoothened without peeling or scratching the paint so that no repainting job will be done and dents are easily repaired.

When the dent damage is huge, it can no longer be repaired using the PDR. The only way to fix it is to remove the entire part and replace it with a new one. It will be removed by pulling and pounding the part and later on, wielding of the new replacement part is being done. After the replacement part has been attached, primer is added on the area to enhance further painting.

We can also do the repairing ourselves at home. This is the do-it-yourself (DIY) car dent removal. This can be done at home if we do not want to got through the PDR. However, professional technicians do not recommend this because this can end up making the problem bigger especially that we are amateurs and we do not have the special tools that are used in dent repairs. It is better that we let the dentmaster repair do their job.

Let a mobile dent repair company fix your car dents! These repair specialists work wonders without the need for repaint, you can save dent repair costs without sacrificing quality output.
Related Links http://www.autointhebox.com
0
Date Submitted Fri. Jan. 13th, 2017 8:31 AM
Revision 1
Syntax Master autlmycar
Tags Launch | Pro | V | x431
Comments 0 comments
One of the most fun parts of being a biker is buying motorcycle apparel such as motorcycle boots. You get to choose among a wide variety of choices and you get to try on different boots before you make your decision.

Of course, you always need to keep in mind that finding the perfect pair is a must not only to complete a gorgeous biker look but also to ensure your safety and comfort while riding. For those who want to buy a new pair of motorcycle boots, here are some tips that will prove to be helpful in your shopping activity.

Step One - Know your Shoe Size

Knowing the size of your foot is important whether you are buying online or offline. This is vital so you can get the perfect fit. Motorcycle footwear should not be too loose or too tight. Your shoes should just fit snugly into your feet. If they are too tight, the shoes may constrict blood flow to your feet. If they are too loose, they may easily slip off your feet during the ride launch x431 v+.

If you are buying offline, even if you give your shoe size, it is still necessary for you to try on the shoes to see if they are comfortable on your feet. Now, if you are buying online launch x431 v pro, it would be a good idea to send a scanned sketch of your foot so the store's personnel can ensure the right fit of the footwear.

Step Two - Consider the Brand

Brands are not simply names. They are testament to quality. Names like Harley Davidson are popular for a very good reason, and that is because it has been able to earn the reputation of producing superior quality boots that give maximum protection to those who wear them. Yes, you may need to spend a little more on this brand, but the investment would be worth it because you can expect it to last a very long time.

Harley Davidson shoes are widely online. For women, there are also Womens Harley Davidson boots that cater to different tastes and styles. There are also Harley Davidson Sandals that you can buy and wear aside from your boots.

Step Three - Choose a Boot that Fits your Style

Do not rely solely on fads when it comes to boots style and design. You can use them to guide your decision but at the end of the day, you still need to consider your personal taste and preference so that you can end up with the pair that would complement your style and personality.

Step Four - Break in your boots

Do not forget to break in your boots before you ride them on an actual motorcycle road trip. You need to wear it several days at home before you take them out because leather takes quite a while to stretch and soften.

Choosing a pair of motorcycle boots may be difficult because of the wide array of choices. However, if you know what brand and style to go for, you can easily find a pair that is perfect for you.

For more details about womens harley davidson boots and harley davidson sandals, please visit us online.
Related Links http://www.x431dbscar.com
0
Date Submitted Mon. Jan. 9th, 2017 3:14 AM
Revision 1
Syntax Master autlmycar
Tags Launch | Pro | V | x431
Comments 0 comments
With driving safety depending on the condition of your tires, you'd have every reason to invest in a fancy tire gauge. But, look in your pocket - you might already have the tire gauge you need.

Got a Lincoln penny? Chances are you do, since the U.S. Mint has been cranking these out since 1909. Because a simple Lincoln head penny is the perfect size, using one will make it easy to determine when to buy new tires.

It only takes a few steps to check your tire depth:

Pinch a Lincoln-head penny, from the base, between your thumb and forefinger launch x431 v+, so that the top of Lincoln's head and the words "In God We Trust" are showing.
Place the top of Lincoln's head into one of the tire tread grooves -- try to measure in the lowest point within the tread launch x431 pro.

If any part of Lincoln's head is obscured by the tread, you're all set -- you have a legal and safe amount of tread. However, if you can see above Lincoln's head or any of the "In God We Trust" letters above his head, then you are ready for a new tire.
Check your tires in several tread locations. Be sure to check both inner, outer and middle grooves of each tire, because tires can wear differently on each side, due to improper wheel alignment and/or low inflation.
This penny trick works because the distance between the rim and Lincoln's head is 1/16 of an inch -- the minimum required tread depth. When your tire tread is lower than 1/16 of an inch, your vehicle can have handling problems in adverse conditions (rain, sleet, snow). In short, bald tires are dangerous and could even get you a ticket in some states.
Related Links http://www.x431dbscar.com
0
Date Submitted Wed. Jan. 4th, 2017 6:01 AM
Revision 1
Syntax Master autlmycar
Tags Launch | Pro | V | x431
Comments 0 comments
Buying an ATV can be an exciting thing. The problem is that you have to find a way to get it home and take it places! The easiest and safest solution is to buy ATV trailers launch x431 v+.

Before you buy your ATV trailers you're going to have to do some research launch x431 pro. The first thing you'll want to do is check your ATV's weight. ATV trailers should have the capacity to pull the weight of one or two ATV's. If ATV trailers do not have the proper weight capacity, it could mean a huge safety problem down the road.

It can really help you to do some research online before you make a purchase. Read some reviews that others have left for certain models and manufacturers. Once you have done enough research it is safe to go to a lot where ATV trailers are sold.

Do not let a salesman talk you into buying something pricier than you were prepared to pay. As long as you've done your research and chosen which ATV trailers you are interested in, it should be a very easy thing to go to the lot and buy one. Salesmen are always looking for the upsell!

Before you leave the lot with ATV trailers you need to look the entire trailer over. Check the tires and other important parts. It would be terrible if you purchased low quality ATV trailers and did not realize it until it was too late to do something about it.

In addition to the tires you need to the lights on ATV trailers. Have someone stand outside while you turn them on to be sure they are working properly. Properly functioning lights and turn signals are essential when you are pulling a heavy load behind your vehicle.

You'll need to attach a trailer hitch to your vehicle for the ATV trailers before you leave the lot. Make sure you do this safely by following all directions. You would hate to wreck your ATV trailers or cause an accident on the road if it gets loose.

In addition to attaching your ATV trailers with a hitch, you need to tie everything down. Getting strong enough tie-downs will ensure that your ATV will not get damaged or shift your vehicle. Make sure these tie-downs meet or exceed the weight capacity and dimensions you actually need. This can help ensure safer travel.

Jon Heus is the owner of , the advanced search facility which can help you to find the best cargo trailer to fit your needs. Whether it is a horse, motorcycle, ATV or any other trailer, he is sure his site will help fill your need.
Related Links http://www.x431dbscar.com
0
Date Submitted Wed. Jan. 4th, 2017 2:39 AM
Revision 1
Syntax Master autosuma
Tags Autel | MaxiCheck | MaxiSys | ms906 | Pro
Comments 0 comments
Myanmar, a Southeast Asian country that was earlier known as Burma, has been under military rule in one form or another since 1962. Struggle for democratic government continued and in January 2011, the country's ruling generals convened the first meeting of Parliament in more than two decades, a move they claimed completed the transition to a multiparty democracy. Though real democracy is still not attained but will be in matter of few years autel maxicheck pro. People will the Sunshine of freedom and prosperity.

Myanmar is taking steps towards growth and development. Tourism is a promising industry to earn foreign exchange due to its natural beauty and interesting political history. Myanmar is rich in natural resources and has strong agricultural base. It also has vast timber, natural gas, and fishery reserves and is a leading source of gems (rubies) and jade.

Myanmar government is making policies to enhance the economy and infrastructure for more growth and international trade.

One such step is that the Authorities have decided to issue import permit to car owners whose cars have been in service for 40 years or more for surrender of the old cars to the Road Transport Department in Rangoon for smelting along with handing over a vehicle registration book. After surrendering the old car, the owner will be given a car import permit. This is to remove the slow moving, fuel inefficient, pollution spreading vehicle of the road and bringing in better vehicles at a low cost to help improve transport and road systems. People also assume some reduction in duties to further encourage the import of used vehicles.

This is great news for Myanmar people and used car exporters around the world. It will not only improve trade between the countries but bring in better used luxury cars, SUV'S, buses at good prices to enhance tourism industry at the highest.

Japan is a great exporter of used vehicle around the World. Thousands of Japanese used cars are exported every month from Japan to countries like Kenya, South Africa autel maxisys ms906 price, Sri Lanka, Bangladesh, Pakistan, Zambia, Dubai, South America etc. Japanese brands like Toyota, Honda, Mazda, Mitsubishi, Suzuki, etc. are very popular around the world for their high technology and durability. Now Myanmar has allowed the import of used cars from Japan and some other countries. People of Myanmar can select from latest used models of Japanese brands with high fuel economy and comfort. Hybrids and electric used cars are also available for export from Japan.

Soon Myanmar will have new look on the streets. Sparkling cars, high speed, noise free, pollution free and amazing exteriors. People will experience smooth and safe transportation. Myanmar should also open import of used agricultural machinery and construction machinery, this will help build better infrastructure and high production in the farms and help in overall development of rural as well urban areas and generate lots of employment for the locals. Our best wishes to the people of Myanmar for success and prosperity.

Please check all kinds of Japanese used cars for import into Myanmar market from Japan from hundreds of trusted Japan cars exporters, please visit now :
Related Links http://www.autelonline.com
0
Date Submitted Wed. Dec. 21st, 2016 7:40 AM
Revision 1
Syntax Master autlmycar
Tags Launch | Pro | V | x431
Comments 0 comments
A shop press is an essential component of any self respecting Do-it-Yourself enthusiast or commercial mechanic. The device is essential in performance of home projects that require two objects pressed together or separated under great amounts of pressure. Mostly, shop presses work on the principle of pneumatics. In other words, they work by means of compressed air to attain the high pressures that are necessary for the applications they are put to work on.

When you require to straighten tools and parts that have become bent in the cause of strenuous application launch x431 v pro, the device is adequate. Caution must be paid proper heed to in carrying out such a project though as you do not want to break up the object rather than having it straightened out. A gentle but firm application of the press' forceful ram will deliver the desired result.

When the press is used to press two objects together, it is important to ensure that the arbor plate and the ram arms are properly aligned. The "receiving" object should then be placed accurately on the plate. The "inserting" object needs to be placed securely on the receiving object.

To ensure that the job is done right, it is important that the upper object is placed square with the aperture that will receive it. Another necessary precaution is to have a sacrificial piece of wood on top to ensure that the object is not damaged from the pressing. This is because the ram can be unexpectedly forceful when applied without proper caution.

To separate two objects, a set of two arbor plates are necessary. Commonly, such plates have differently sized half circles cut off from each side. Butt the two plates on the press table such that the half holes match up to form a perfect circle. Take care to ensure that the plates support the joined items and yet has enough allowance to let the object that has to be separated to fall off the table.

In this case as well, a sacrificial wood needs to be secured on top of the objects to serve as a buffer against the battering force of the pounding ram. The wheel of the press must be gently but firmly turned. This ensures everything is safely latched up before the actual separation process takes place. Ensure that you keep checking how and if the objects have separated properly and not just wait up until one falls off. This preempts any problems that might occur before the process is over.

For automotive repair enthusiasts, an effective and well maintained shop press is an indispensable piece of equipment to have in your garage. This is because jobs such as separating and pressing together wheel bearings, piston wrist pins and valve guides are virtually impossible to carry out without it. To ensure that these and other heavy duty projects that are characteristic of automotive work are done perfectly launch x431 v+, it is important to have a shop press with a high power rating.

There is no doubt that these devices are essential components in performing a variety of DIY projects in the home. Caution needs to be an important watchword though as the incidences of serious injuries are daily reported from injudicious use of these high powered tools. However, so long as you make proper choices, a shop press is a device that will prove effective for a host of applications for homeowners and garage tinkers.

Related Links http://www.x431dbscar.com
0
Date Submitted Fri. Dec. 16th, 2016 2:21 AM
Revision 1
Syntax Master axcartool
Tags Launch | MaxiSys | Pro | V | x431
Comments 0 comments
Trying to figure out how your vehicle got from the place it was built to where you live can be confusing if you do not know the process. Unless you do some research, you will really never know much about car transport. Here is some information that can help you to understand what the process is, in case it is something that you need to know.

Many companies use vehicle transport in order to move their products from one place to another. There are a few different ways that this can be accomplished, regardless of how many at a time need to be moved to various destinations. No matter how they are moved, there is always a good way to get vehicles moved that will allow for everyone involved to be happy with the results.

When you are considering the way manufacturing plants utilize auto transport to get their products to car sales floors, they have a few options available. Using container ships, that can move a great many cars at one time, is a great service to use. After the cars have been shipped, they are usually stored in a big parking lot like area until they are ready to be moved again.

Big eighteen wheel trailers are often used to transport many units from the lots they are held at after being shipped. The trucks can hold a few cars at a time and will bring them to a destination spot by using the road. This is always a safe way to get the new vehicles where they need to go.

Sometimes the need to move only one car from place to place and that can also be done without too much fuss. There are many moving companies that provide this type of service for you when you need it. You can find these services easily once you have determined the details of your need.

You can use your home computer to do a search to find the companies that offer this service. You will realize that each company may offer different types of services and it will be up to you to research each one. Many places will offer you free estimates based on what you want and the information that you give to them so it is wise to research a few different ones to get the best prices.

The company that you ultimately choose will help you with all of the extra things that need to be done in order to complete your car shipping needs. Any paperwork and costs will be taken care of before you sign any agreements so that you know what the entire process is entailing launch x431 v+. Make sure that you get some good references about the company you are choosing so that you know they are legitimate.

Needing car transport does not have to be a difficult thing to figure out if you know what your needs are and you are willing to do a little research. Using the internet can help you to locate exactly what you are looking for MaxiSys Pro. The companies that offer this type of service will do all the paperwork and make sure that you understand the process so that you can be sure that your needs are met reliably.

Canada's leading vehicle relocation company ensures that your car shipping is done right, for vehicles and clients large and small.
Related Links http://www.autointhebox.com
« Previous 1 2 3 4 5 6 7 8 9  ...  28 29 Next »